6 Axis CNC Controller F86

The CNC controller F86 is a new product from QS Technology, featuring a larger design with an 8-inch display that has a resolution of 800 x 600 pixels. This makes operating and monitoring machine information more intuitive and easier for the operator. Additionally, the modern and fresh interface design is a significant advantage that attracts users at first glance. The F86 controller allows for the simultaneous control of 4 to 6 axes and includes an Encoder phase Z feedback function, enabling operators to return axes to the home position more accurately. With its high-performance processor, the F86 controller integrates a PLC processing module, allowing users to monitor operational status and program extended machine functionalities. Moreover, the ability to program Macros is a strong feature of the F86 controller.

 

 

Back side of F86 Controller

 

 

 

 

 

The interface provides a detailed visual simulation of the machining program profile, which can be displayed in 2D milling, 3D milling, and 2D and 3D engraving modes.

 

 

 

 

 

Some application photos of the product on machines have been taken by customers

 

	Description	Values
Product specification	Dimension	320 x 185 x 30 (mm)
	Outer case materials	Aluminum anodizing
	Max. PLC Axis	6
	Standard Axis	6
	Max. Axis (Optional)	6
	Max. Spindle	2
	Max Spindle Simultaneous Axis Control	6
	Min. Control Unit	0.0001
	Max. Number Of Program Coordinate	18
	Max. Number of Table Tools	40
	Look-Ahead	250
	Block Processing Time	250
Hardware	Standard I/O	24/16
	Optional I/O	256/256
	DA	1
	Monitor	8 Inch
	RS485	1
	USB port	1
Compensation features	Backlash compensation	Yes
	Pitch Error compensation	No
Basic features	MPG Simulation	Yes
	Dry Run	Yes
	Optional Stop	Yes
	Single Block	Yes
	External Offsets	Yes
	MPG Offsets	Yes
G-code support	G00 – Positioning	Yes
	G01 – Linear Interpolation	Yes
	G02 – Circular/ Helical Interpolation – CW	Yes
	G03 – Circular/ Helical Interpolation – CCW	Yes
	G04 – Dwell	Yes
	G17 – X-Y plane selection	Yes
	G18 – Z-X plane selection	Yes
	G19 – Y-Z plane selection	Yes
	G20 – Inch perform	Yes
	G21 – mm perform	Yes
	G28 – Return to reference position	Yes
	G30 – 2nd, 3rd,  4th reference position return	Yes
	G31 – Skip Function	Yes
	G43 – Tool length compensation in positive direction	Yes
	G44 – Tool length compensation in negative direction	Yes
	G49 – Tool length compensation cancel	Yes
	G53 – Machine coordinate system setting	Yes
	G54 – Workpiece coordinate system selection 1	Yes
	G55 – Workpiece coordinate system selection 2	Yes
	G56 – Workpiece coordinate system selection 3	Yes
	G57 – Workpiece coordinate system selection 4	Yes
	G58 – Workpiece coordinate system selection 5	Yes
	G59 – Workpiece coordinate system selection 6	Yes
	G61 – Exact Stop Mode	Yes
	G64 – Cutting mode	Yes
	G65 – Macro call	Yes
	G73 – High speed peck drilling cycle	Yes
	G76 – Fine boring cycle	Yes
	G80 – Canned cycle cancel	Yes
	G81 – Drilling cycle	Yes
	G82 – Drilling cycle of dwell on the hole bottom	Yes
	G83 – Peck drilling cycle	Yes
	G84 – CW tapping cycle	Yes
	G85 – Boring cycle	Yes
	G86 – High speed drilling cycle	Yes
	G87 – Fine boring cycle of back side	Yes
	G88 – Semi-automation fine boring cycle	Yes
	G89 – Boring cycle stops and the end of bottom hole	Yes
	G90 – Absolute coordinate systems	Yes
	G91 – Increment command	Yes
	G92 – Work coordinate setting system	Yes
	G93 – Feed in mm per minute	Yes
	G94 – Distance/F (min	Yes
	G98 – Return to initial point in canned cycle	Yes
	G99 – Return to R point in canned cycle	Yes