{"id":5633,"date":"2024-06-03T09:12:04","date_gmt":"2024-06-03T02:12:04","guid":{"rendered":"https:\/\/qstcnc.com\/?post_type=product&p=5633"},"modified":"2024-10-14T13:50:12","modified_gmt":"2024-10-14T06:50:12","slug":"astro-series-10i-cnc-controller","status":"publish","type":"product","link":"https:\/\/qstcnc.com\/en\/product\/astro-series-10i-cnc-controller","title":{"rendered":"6 Axis CNC Controller Astro 10i"},"content":{"rendered":"

The Astro 10i CNC controller is the highest-end product from QS Technology, offering a complete range of features, powerful performance, closed-loop control, and integrated FPGA technology to provide the best experience for operators. The Astro 10i is an upgraded version of the Astro 6AV and Astro-6AH models, with an expanded function key layout and additional electronic components such as switches and an emergency stop button. Additionally, the 10.4-inch screen with a resolution of 800 x 600 enables operators to monitor parameters clearly and in detail.<\/p>\n

\"\"<\/p>\n

 <\/p>\n

\"\"<\/p>\n

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/th>\nDescription<\/th>\nValues<\/th>\n<\/tr>\n
Product specification<\/strong><\/td>\nDimension<\/td>\n254 x 515 x 42 (mm)<\/td>\n<\/tr>\n
Outer case materials<\/td>\nAluminum anodizing<\/td>\n<\/tr>\n
Max. PLC Axis<\/td>\n6<\/td>\n<\/tr>\n
Standard Axis<\/td>\n6<\/td>\n<\/tr>\n
Max. Axis (Optional)<\/td>\n6<\/td>\n<\/tr>\n
Max. Spindle<\/td>\n2<\/td>\n<\/tr>\n
Max Spindle Simultaneous Axis Control<\/td>\n6<\/td>\n<\/tr>\n
Min. Control Unit<\/td>\n0.0001<\/td>\n<\/tr>\n
Max. Number Of Program Coordinate<\/td>\n18<\/td>\n<\/tr>\n
Max. Number of Table Tools<\/td>\n40<\/td>\n<\/tr>\n
Look-Ahead<\/td>\n500<\/td>\n<\/tr>\n
Block Processing Time<\/td>\n500<\/td>\n<\/tr>\n
Hardware<\/strong><\/td>\nStandard I\/O<\/td>\n24\/16<\/td>\n<\/tr>\n
Optional I\/O<\/td>\n256\/256<\/td>\n<\/tr>\n
DA<\/td>\n1<\/td>\n<\/tr>\n
Monitor<\/td>\n10.4 Inch<\/td>\n<\/tr>\n
RS485<\/td>\n1<\/td>\n<\/tr>\n
USB port<\/td>\n1<\/td>\n<\/tr>\n
Compensation features<\/strong><\/td>\nBacklash compensation<\/td>\nYes<\/td>\n<\/tr>\n
Pitch Error compensation<\/td>\nYes<\/td>\n<\/tr>\n
Basic features<\/strong><\/td>\nMPG Simulation<\/td>\nYes<\/td>\n<\/tr>\n
Dry Run<\/td>\nYes<\/td>\n<\/tr>\n
Optional Stop<\/td>\nYes<\/td>\n<\/tr>\n
Single Block<\/td>\nYes<\/td>\n<\/tr>\n
External Offsets<\/td>\nYes<\/td>\n<\/tr>\n
MPG Offsets<\/td>\nYes<\/td>\n<\/tr>\n
G-code support<\/strong><\/td>\nG00<\/strong> – Positioning<\/td>\nYes<\/td>\n<\/tr>\n
G01<\/strong> – Linear Interpolation<\/td>\nYes<\/td>\n<\/tr>\n
G02<\/strong> –\u00a0Circular\/ Helical Interpolation – CW<\/td>\nYes<\/td>\n<\/tr>\n
G03<\/strong> –\u00a0Circular\/ Helical Interpolation – CCW<\/td>\nYes<\/td>\n<\/tr>\n
G04<\/strong> – Dwell<\/td>\nYes<\/td>\n<\/tr>\n
G17<\/strong> – X-Y plane selection<\/td>\nYes<\/td>\n<\/tr>\n
G18<\/strong> – Z-X plane selection<\/td>\nYes<\/td>\n<\/tr>\n
G19<\/strong> – Y-Z plane selection<\/td>\nYes<\/td>\n<\/tr>\n
G20<\/strong> – Inch perform<\/td>\nYes<\/td>\n<\/tr>\n
G21<\/strong> – mm perform<\/td>\nYes<\/td>\n<\/tr>\n
G28<\/strong> –\u00a0Return to reference position<\/td>\nYes<\/td>\n<\/tr>\n
G30<\/strong> –\u00a02nd, 3rd,\u00a0 4th reference position return<\/td>\nYes<\/td>\n<\/tr>\n
G31<\/strong> – Skip Function<\/td>\nYes<\/td>\n<\/tr>\n
G43<\/strong> –\u00a0Tool length compensation in positive direction<\/td>\nYes<\/td>\n<\/tr>\n
G44<\/strong> –\u00a0Tool length compensation in negative direction<\/td>\nYes<\/td>\n<\/tr>\n
G49<\/strong> –\u00a0Tool length compensation cancel<\/td>\nYes<\/td>\n<\/tr>\n
G53<\/strong> –\u00a0Machine coordinate system setting<\/td>\nYes<\/td>\n<\/tr>\n
G54<\/strong> –\u00a0Workpiece coordinate system selection 1<\/td>\nYes<\/td>\n<\/tr>\n
G55 <\/strong>–\u00a0Workpiece coordinate system selection 2<\/td>\nYes<\/td>\n<\/tr>\n
G56 <\/strong>–\u00a0Workpiece coordinate system selection 3<\/td>\nYes<\/td>\n<\/tr>\n
G57 <\/strong>–\u00a0Workpiece coordinate system selection 4<\/td>\nYes<\/td>\n<\/tr>\n
G58 <\/strong>–\u00a0Workpiece coordinate system selection 5<\/td>\nYes<\/td>\n<\/tr>\n
G59 <\/strong>–\u00a0Workpiece coordinate system selection 6<\/td>\nYes<\/td>\n<\/tr>\n
G61<\/strong> – Exact Stop Mode<\/td>\nYes<\/td>\n<\/tr>\n
G64<\/strong> – Cutting mode<\/td>\nYes<\/td>\n<\/tr>\n
G65<\/strong> – Macro call<\/td>\nYes<\/td>\n<\/tr>\n
G73<\/strong> –\u00a0High speed peck drilling cycle<\/td>\nYes<\/td>\n<\/tr>\n
G76<\/strong> – Fine boring cycle<\/td>\nYes<\/td>\n<\/tr>\n
G80<\/strong> – Canned cycle cancel<\/td>\nYes<\/td>\n<\/tr>\n
G81<\/strong> – Drilling cycle<\/td>\nYes<\/td>\n<\/tr>\n
G82<\/strong> –\u00a0Drilling cycle of dwell on the hole bottom<\/td>\nYes<\/td>\n<\/tr>\n
G83<\/strong> – Peck drilling cycle<\/td>\nYes<\/td>\n<\/tr>\n
G84<\/strong> –\u00a0CW tapping cycle<\/td>\nYes<\/td>\n<\/tr>\n
G85<\/strong> – Boring cycle<\/td>\nYes<\/td>\n<\/tr>\n
G86<\/strong> –\u00a0High speed drilling cycle<\/td>\nYes<\/td>\n<\/tr>\n
G87<\/strong> –\u00a0Fine boring cycle of back side<\/td>\nYes<\/td>\n<\/tr>\n
G88<\/strong> –\u00a0Semi-automation fine boring cycle<\/td>\nYes<\/td>\n<\/tr>\n
G89<\/strong> –\u00a0Boring cycle stops and the end of bottom hole<\/td>\nYes<\/td>\n<\/tr>\n
G90<\/strong> – Absolute coordinate systems<\/td>\nYes<\/td>\n<\/tr>\n
G91<\/strong> – Increment command<\/td>\nYes<\/td>\n<\/tr>\n
G92<\/strong> – Work coordinate setting system<\/td>\nYes<\/td>\n<\/tr>\n
G93<\/strong> –\u00a0Feed in mm per minute<\/td>\nYes<\/td>\n<\/tr>\n
G94<\/strong> –\u00a0Distance\/F (min<\/td>\nYes<\/td>\n<\/tr>\n
G98<\/strong> –\u00a0Return to initial point in canned cycle<\/td>\nYes<\/td>\n<\/tr>\n
G99<\/strong> –\u00a0Return to R point in canned cycle<\/td>\nYes<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

\n
\n
\n
\n
    \n
  • 10.4 Inch LCD<\/li>\n
  • Axis control: 6 axis<\/li>\n
  • Spindle control: 2<\/li>\n
  • Input\/Output port: 24\/16<\/li>\n
  • Max I\/O Optional: 256\/256<\/li>\n
  • Real-time PLC debug<\/li>\n
  • Look-Ahead: 1000 lines<\/li>\n
  • Backlash compensation<\/li>\n
  • Pitch Error compensation<\/li>\n
  • Encoder feedback: All axis<\/li>\n<\/ul>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n","protected":false},"featured_media":5984,"comment_status":"closed","ping_status":"closed","template":"","meta":[],"product_cat":[65],"product_tag":[],"class_list":["post-5633","product","type-product","status-publish","has-post-thumbnail","hentry","product_cat-cnc-controller"],"_links":{"self":[{"href":"https:\/\/qstcnc.com\/en\/wp-json\/wp\/v2\/product\/5633","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/qstcnc.com\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/qstcnc.com\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/qstcnc.com\/en\/wp-json\/wp\/v2\/comments?post=5633"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/qstcnc.com\/en\/wp-json\/wp\/v2\/media\/5984"}],"wp:attachment":[{"href":"https:\/\/qstcnc.com\/en\/wp-json\/wp\/v2\/media?parent=5633"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/qstcnc.com\/en\/wp-json\/wp\/v2\/product_cat?post=5633"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/qstcnc.com\/en\/wp-json\/wp\/v2\/product_tag?post=5633"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}